homepage

» Products » Filtration » Multimedia Sand Filters

Multimedia Sand Filters

Standard Properties

Paint : Production which is St37-2 is painted in/out double times.

Tubing : Galvanized St37-2 is steel or PN16 PVC-U.

Automation : Between DCF0214 and DCF1015 controls with multi-way valves.Between DCF1215 and DCF3015 controls by diaphragm valve which is surface tubed or electrical actuator valve.

* Maximum 9 bar for working pressure,
* Back-washing by timer,
* Automatic air clearing valve,
* Manual including air valve and drainage valve for tank,
* Examplar valves ( in/out lines of the system ) ,
* Manometers ( in/out lines of the system ) ,
* PLC / IP 54 controller panel with smart relay control,
* Electric 220 V / 50 Hz / 1 pH,

Optional Properties

* Back-washing with pressure difference control
* Switch of pressure difference
* Special filter design of application
* Grazing with air before back-washing
* Flow sensor and monitor
* Neoprene or CTP casing
* Tank production for ASME standards
* Filter tanks with Loyd certificate
* Production of high pressure tank
* Galvanized tank production with hot-dip

Multimedia Filters

Multimedia filters, the suspended solids in the water, turbidity and remove invisible other particles away and to protect the equipment.When the system is designing, a lot of layers which has different degrees beds into the body. In a well-made filtration systems which will go to other treatment filters of load will be minimum and the yield and equipment’s life are going to increase.

Automatic multi-layer sand filters become three granule size gravel, quartz sand and anthracite which is on top. The cause of usage of different included sand, creating a minimum space between layers and maximum sedimantation capacity. The most important parameters that effecting of the yield, amount of minerals, correct sequence, chemical structure, granulometric properties, filtration rate. In a filter of filtration accuracy is less than 10 micron when good beared and appropriated to pollution load of filtration rate.

Multimedia Tubing with Surface Tubing

Filtration system which is designed for industrial usages made by steel and inner surface painted with epoxy, exterior surface painted with synthteic dyes. Automatical service and back-washing processes control by a group of hydrolic valves which have diaphragm. Starting time and operating frequency of back-washing can set on the logic programmer panel.

MODEL DIMENSIONS BODY MATERIAL CONNECTION FLOW (m^3 / h) MINERAL
DIAMETER(mm) CYLINDER HEIGHT     (mm) 10m/h 15m/h 20m/h 25m/h ANTHRACITE(kg) QUARTZ   (kg)
DMF0210 200(8") 1000 FRP DN25/DN20 0,3 0,47 0,6 0,78 5 20
DMF0212 250(10") 1250 FRP DN25/DN20 0,5 0,7 1 1,2 8 40
DMF0312 300(12") 1250 FRP DN25/DN20 0,7 1 1,4 1,75 10 75
DMF0313 330(13") 1250 FRP DN25 0,85 1,28 1,7 2,1 15 100
DMF0315 350(14") 1500 FRP DN25 0,96 1,45 1,9 2,4 20 120
DMF0414 400(16") 1500 FRP DN40/DN25 1,3 1,9 2,5 3,1 30 210
DMF0415 450(18") 1500 FRP DN40/DN25 1,6 2,4 3,2 4 40 240
DMF0515 530(21") 1500 FRP DN40/DN25 2,2 3,3 4,4 5,5 50 300
DMF0615 610(24") 1500 FRP DN50/DN40 2,9 4,3 5,8 7,3 60 350
DMF0715 762(30") 1500 FRP DN50 4,5 6,8 9,1 11,4 100 600
DMF0915 914(36") 1500 FRP DN50 6,5 9,8 13,1 16,3 150 900
DMF1015 1060(42") 1500 FRP DN50 8,8 13,2 17,6 22 200 1050
DMF1215 1200 1500 FRP / ST37-2 DN65 11,6 17,5 23,4 29,2 250 1275
DMF1315 1300 1500 ST37-2 DN65 13,2 19,9 26,5 33,1 300 1350
DMF1415 1400 1500 FRP / ST37-2 DN65 15,4 23 30,7 38,4 325 2625
DMF1515 1500 1500 ST37-2 DN80 17,6 26,5 35,3 44,1 400 2325
DMF1615 1600 1500 FRP / ST37-2 DN80 20 30 40,1 50,2 450 2625
DMF1815 1800 1500 ST37-2 DN80 25,4 38,1 50,8 63,6 550 2600
DMF1915 1900 1500 ST37-2 DN80 28,3 42,5 56,7 70,8 600 2750
DMF2015 2000 1500 ST37-2 DN100 31,4 47,1 62,8 78,5 650 3300
DMF2115 2100 1500 ST37-2 DN100 34,6 51,9 69,2 86,5 700 3500
DMF2215 2200 1500 ST37-2 DN100 38 57 76 95 750 4000
DMF2415 2400 1500 ST37-2 DN125 45,2 67,8 90,4 113 950 4700
DMF2515 2500 1500 ST37-2 DN150 49 73,6 98,1 122,6 1000 5250
DMF2615 2600 1500 ST37-2 DN150 53 79,6 106,1 132,7 1100 6000
DMF2715 2700 1500 ST37-2 DN150 57,2 85,8 114,5 143 1200 6500
DMF2815 2800 1500 ST37-2 DN150 61,5 92,3 123 153,9 1300 7000
DMF3015 3000 1500 ST37-2 DN200 70,6 106 141,3 176,6 1500 7250

DEBA SU
Yıldız Mah. Yıldız Cad. 225 Sok.
Fatih Apt. No:23 Antalya/Türkiye
+90 242 243 80 43 Pbx
info@debasu.com.tr



All rights reserved for Deba Su © 2010 - 2018
Designed by Ajansweb