homepage

» Products » Softening » Single Softening

Single Softening

Standard Properties

* Hardness accepted 40 Fr.

Paint : Production which is St37-2 is painted in/out double times.

Tubing : Galvanized St37-2 is steel or PN16 PVC-U.

Automation : Between DCF0214 and DCF1015 controls with multi-way valves.Between DCF1215 and DCF3015 controls by diaphragm valve which is surface tubed or electrical actuator valve.

* Maximum 9 bar for working pressure,
* Back-washing by timer,
* Automatic air clearing valve,
* Manual including air valve and drainage valve for tank,
* Examplar valves ( in/out lines of the system ) ,
* Manometers ( in/out lines of the system ) ,
* PLC / IP 54 controller panel with smart relay control,
* Electric 220 V / 50 Hz / 1 pH,

Optional Properties

* Flow sensor and monitor
* Neoprene or CTP casing
* Tank production for ASME standards
* Filter tanks with Loyd certificate
* Production of high pressure tank
* Galvanized tank production with hot-dip
* Special filter design to installation

Single Water

Calsium (Ca2+) and Magnesium (Mg2+) minerals are which in water creat hardness (lime). Hardness minerals damage to firstly people’s health, the installation, and machines which is working with water.So, these dangerous minerals should put out from the water. Water softening is a process which is changing calsium and magnesium minerals with sodium salts and removing the hardness form water. Water is passed from a resin bed to use sodium minerals. Than decreased sodium mineral in the resin will refresh and regeneration with salt (NaCl). Regeneration process is done automatically with automation with on the controller panel of water softener. Automation process is divided to two option:

With Time Controller: Water softener units with time controller makes the regeneration process with salty water at the desired day or hour without human intervension.

If the water usage increases when the machine is making regeneration process, hard water gives the system from on the valve’s own units.Special designs can make for high capacity.

Single Type: Water softener units with flow controller’s regeneration process is depend on the raw water hardness and usage of resin amount. Single water softener is formed one softener unit and contains a tank. Regeneration process is made automatically. Also Regeneration intervals consist of back-washing, absorbtion of salt water, slow rinsing, fast rinsing and filling of salt water and become ready to service position after these five stages.

MODEL DIMENSIONS BODY MATERIAL CONNECTION FLOW (m^3 / h) MINERAL
DIAMETER (mm) CYLINDER HEIGHT (mm) 40m/h 45m/h ROSIN  (L) QUARTZ   (kg)
DS0210 200(8") 1000 FRP DN25/DN20 1,2 1,4 15 5
DS0212 250(10") 1250 FRP DN25/DN20 2 2,2 40 10
DS0312 300(12") 1250 FRP DN25/DN20 2,8 3,2 50 12
DS0313 330(13") 1250 FRP DN25 3,4 3,8 65 15
DS0315 350(14") 1500 FRP DN25 3,8 4,3 100 15
DS0414 400(16") 1500 FRP DN40/DN25 5 5,6 125 25
DS0415 450(18") 1500 FRP DN40 6,3 7,1 150 30
DS0515 530(21") 1500 FRP DN40 8,8 10 200 40
DS0615 610(24") 1500 FRP DN50/DN40 11,6 13,1 300 50
DS0715 762(30") 1500 FRP DN50 18,1 20,4 500 60
DS0915 914(36") 1500 FRP DN80/DN50 26 29,2 750 75
DS1015 1060(42") 1500 FRP DN80/DN65 35,2 39,6 900 100
DS1215 1200 1500 FRP / ST37-2 DN80/DN65 45,2 50,8 1200 150
DS1315 1300 1500 ST37-2 DN65/DN50 53 59,7 1250 150
DS1415 1400 1500 FRP / ST37-2 DN80/DN65 61,5 69,2 1400 200
DS1515 1500 1500 ST37-2 DN100/DN80 70 79,5 1600 250
DS1615 1600 1500 FRP / ST37-2 DN100/DN80 80 90 1800 300
DS1815 1800 1500 ST37-2 DN100/DN80 101 114 2300 300
DS1915 1900 1500 ST37-2 DN125 113 127 2500 400
DS2015 2000 1500 ST37-2 DN125 125 141 2800 450
DS2115 2100 1500 ST37-2 DN150 138 156 3200 450
DS2215 2200 1500 ST37-2 DN100 151 170 3500 500
DS2415 2400 1500 ST37-2 DN125 151 170 4000 500
DS2515 2500 1500 ST37-2 DN150 151 170 4500 600
DS2615 2600 1500 ST37-2 DN150 151 170 4800 600
DS2715 2700 1500 ST37-2 DN150 151 170 5200 800
DS2815 2800 1500 ST37-2 DN150 151 170 5600 800
DS3015 3000 1500 ST37-2 DN150 151 170 6400 1000

DEBA SU
Yıldız Mah. Yıldız Cad. 225 Sok.
Fatih Apt. No:23 Antalya/Türkiye
+90 242 243 80 43 Pbx
info@debasu.com.tr



All rights reserved for Deba Su © 2010 - 2018
Designed by Ajansweb