homepage

» Products » Softening » Tandem Softening

Tandem Softening

Standard Properties

Paint : Production which is St37-2 is painted in/out double times.

Tubing : Galvanized St37-2 is steel or PN16 PVC-U.

Automation : Between DCF0214 and DCF1015 controls with multi-way valves.Between DCF1215 and DCF3015 controls by diaphragm valve which is surface tubed or electrical actuator valve.

* Maximum 9 bar for working pressure,
* Back-washing by timer,
* Automatic air clearing valve,
* Manual including air valve and drainage valve for tank,
* Examplar valves ( in/out lines of the system ) ,
* Manometers ( in/out lines of the system ) ,
* PLC / IP 54 controller panel with smart relay control,
* Electric 220 V / 50 Hz / 1 pH,

Optional Properties

* Flow sensor and monitor
* Neoprene or CTP casing
* Tank production for ASME standards
* Filter tanks with Loyd certificate
* Production of high pressure tank
* Galvanized tank production with hot-dip
* Special filter design to installation

Controlled by flow of water softening units, according to the raw water hardness and amount of resin used, can enter regeneration with salt water at set flow automatically.Tandem Water softener units is a system which has two tanks.Tandem Water Softener units become two softener units.Resin tanks work alternately at fully automatic tandem type water softener units.when one of the tank is making regeneration transaction,the other tank is working and softener can always give water to system.So, the system can work 24 hour without people’s intervention and product soft water. Controlled by flow of water softening units of regeneration intervals are up to the usage of water consumption. Regeneration intervals consist of back-washing, absorbtion of salt water, slow rinsing, fast rinsing and filling of salt water. When resin gives the water Calsium (Ca+2), Magnesium (Mg+2) ions,takes Sodium (Na+) ions and become ready to service position after these five stages

MODEL DIMENSIONS BODY MATERIAL CONNECTION FLOW (m^3 / h) MINERAL
DIAMETER (mm) CYLINDER HEIGHT (mm) 40m/h 45m/h ROSIN      (L) QUARTZ   (kg)
DST0210 200(8") 1000 FRP DN25/DN20 1,2 1,4 2x15 2x5
DST0212 250(10") 1250 FRP DN25/DN20 2 2,2 2x40 2x10
DST0312 300(12") 1250 FRP DN25/DN20 2,8 3,2 2x50 2x12
DST0313 330(13") 1250 FRP DN25 3,4 3,8 2x65 2x15
DST0315 350(14") 1500 FRP DN25 3,8 4,3 2x100 2x15
DST0414 400(16") 1500 FRP DN40/DN25 5 5,6 2x125 2x25
DST0415 450(18") 1500 FRP DN40 6,3 7,1 2x150 2x30
DST0515 530(21") 1500 FRP DN40 8,8 10 2x200 2x40
DST0615 610(24") 1500 FRP DN50/DN40 11,6 13,1 2x300 2x50
DST0715 762(30") 1500 FRP DN50 18,1 20,4 2x500 2x60
DST0915 914(36") 1500 FRP DN80/DN50 26 29,2 2x750 2x75
DST1015 1060(42") 1500 FRP DN80/DN65 35,2 39,6 2x900 2x100
DST1215 1200 1500 FRP / ST37-2 DN80/DN65 45,2 50,8 2x1200 2x150
DST1315 1300 1500 ST37-2 DN65/DN50 53 59,7 2x1250 2x150
DST1415 1400 1500 FRP / ST37-2 DN80/DN65 61,5 69,2 2x1400 2x200
DST1515 1500 1500 ST37-2 DN100/DN80 70 79,5 2x1600 2x250
DST1615 1600 1500 FRP / ST37-2 DN100/DN80 80 90 2x1800 2x300
DST1815 1800 1500 ST37-2 DN100/DN80 101 114 2x2300 2x300
DST1915 1900 1500 ST37-2 DN125/DN100 113 127 2x2500 2x400
DST2015 2000 1500 ST37-2 DN125/DN100 125 141 2x2800 2x450
DST2115 2100 1500 ST37-2 DN125/DN100 138 156 2x3200 2x450
DST2215 2200 1500 ST37-2 DN150/DN125 151 170 2x3500 2x500
DST2415 2400 1500 ST37-2 DN150/DN125 151 170 2x4000 2x500
DST2515 2500 1500 ST37-2 DN150 151 170 2x4500 2x600
DST2615 2600 1500 ST37-2 DN150 151 170 2x4800 2x600
DST2715 2700 1500 ST37-2 DN150 151 170 2x5200 2x800
DST2815 2800 1500 ST37-2 DN150 151 170 2x5600 2x800
DST3015 3000 1500 ST37-2 DN150 151 170 2x6400 2x1000

DEBA SU
Yıldız Mah. Yıldız Cad. 225 Sok.
Fatih Apt. No:23 Antalya/Türkiye
+90 242 243 80 43 Pbx
info@debasu.com.tr



All rights reserved for Deba Su © 2010 - 2018
Designed by Ajansweb